ADLINK Technology PCI-MP4S Bedienungsanleitung PDF herunterladen (Seite 23)

Function Library • 17

Installation Guide

3.1 Hardware Installation

3.1.1 PCI-MP4S

Use the following steps to install the PCI-MP4S board on the PCI bus:

1. Remove the computer cover using the instructions from the computer

manual.

2. Check that there is an empty PCI (32-bit) slot to accommodate the board.

If there is no empty slot, remove a PCI board from the computer to make

room for the PCI-MP4S board and note the chosen slot number (i.e. card

index).

3. Remove the blank metal plate located at the back of the selected slot (if

any). Keep the removed screw to fasten the PCI-MP4S board after

installation.

4. Carefully position the PCI-MP4S in the selected PCI slot as illustrated

below. If using a tower computer, orient the board to suit the board slots.

5. Once perfectly aligned with an empty slot, press the board firmly but

carefully into the connector.

6. Anchor the board by replacing the screw.

7. Connect your video sources for image acquisition tests. For details, refer

to the “ViewCreator” utility.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 82 83

Keine Kommentare

ADLINK Technology PCI-MP4S Bedienungsanleitung Seite 23