ADLINK Technology CoreModule 730 Bedienungsanleitung PDF herunterladen (Seite 19)

MiniModule SIO Reference Manual 15

Chapter 3 Hardware

Overview

This chapter discusses the user interfaces of the module in the following order:

• MiniBlade Storage Solution

• Serial Interfaces

• Parallel Interface

• USB Interfaces

• I

C Bus

• Keyboard/Mouse Interface

• Power In Interface

• Battery Interface

• LPC Interface

MiniBlade Storage Solution

The MiniBlade consists of a 40-pin, right-angle socket interface. This socket will carry all of the appropriate

USB signals. Possible uses for the storage system include a rugged flash storage device, rugged operating

system boot device, or a rugged wireless transceiver.

Table 3-1 provides the pin signal definitions for the MiniBlade Storage System.

NOTE ADLINK Technology, Inc. supports only the features tested and listed in this manual.

The integrated circuits used in the MiniModule SIO may provide more features than

are listed for the MiniModule SIO, but some of these features are not supported on

the module and will not function as specified.

This chapter includes pinout tables only for non-standard headers and connectors.

This chapter does not include pinout tables for standard headers and connectors such

as Serial DB9, PC/104, and SUMIT.

Table 3-1. MiniBlade Interface Pin Signal Definitions (J19)

Pin # Signal Description

+3VSB Standby Voltage – Connecting the always-on standby voltage +3V to the

target electronics allows the module to remain powered during low-

power ACPI suspend/standby/sleep states for those SBCs that support

ACPI.

2 SMB/I2C_DATA

3 SATA+ Not connected

4SMB/I2C_CLK

5SATA-

6SMB/

I2C_ALERT#

+3V3_1

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Keine Kommentare

ADLINK Technology CoreModule 730 Bedienungsanleitung Seite 19