ADLINK Technology PCI-MP4S Bedienungsanleitung Seite 1

PCI-MP4S 4-CH MPEG4 Software Video Compression Card User’s Manual

Introduction • 4 programmable inactivity time-out. This ensures reliable operation of remote systems. 1.1. 7 I/O Lines The PCI-MP4S is fitted with

Hardware Reference • 5 2 Hardware Reference 2.1 PCI-MP4S Specification Video Input Four composite video color digitizers Video input interface: four c

Hardware Reference • 6 Watch Dog Timer  For monitoring applications – will reset the PC after a programmable inactivity time-out.  Interface: 2-pi

Hardware Reference • 7 2.1.1 PCI-MP4S Appearance PCI-MP4S Standard accssory Watch dog reset cable, GPIO bracket, User Manual, All in One C

Hardware Reference • 8 2.1.2 PCI-MP4S Connectors & Pin Definitions Video Inputs ConnectorDefinition Video IN – CH 0 Video IN – CH 1 Video IN

Hardware Reference • 9 Channel Extension Video Input (CN2) PIN NO. Function PIN NO. Function 1 GND 2 CH4 video in 3 CH5 video in 4 GND 5 GND

Hardware Reference • 10 GPIO (CN8) PIN NO. Function PIN NO. Function 1 IN0 (External interrupt)2 GND 3 OUT0 4 Software Trigger 0 5 IN1 (External int

Hardware Reference • 11 2.1.3 RTV-E4 Extension board for RTV-24 and PCI-MP4S (Optional item, not a standard accessory) RTV-E4 Appearance

Hardware Reference • 12 2.1.4 RTV-I4 Isolation GPIO board for RTV-24 and PCI-MP4S (Optional item, not a standard accessory) RTV-I4 Appearan

Hardware Reference • 13 1313RTV-I4 Connectors & Pin Definitions Relay output signal select:  Relay output types: Normal open or Normal closed 

Hardware Reference • 14 13 STRG output signal types: Active high or Active low  Signal names: STRG_OUT1, STRG_OUT2, STRG_OUT3, STRG_OUT4  Jumper

Hardware Reference • 15 PIN NO. Function PIN NO. Function 1 GPIO Input 3 2 GND 3 GPIO Output 3 4 PORT3 STRG Output 5 GPIO Input 4 6 PORT4 STR

Function Library • 17 3 Installation Guide 3.1 Hardware Installation 3.1.1 PCI-MP4S Use the following steps to install the PCI-MP4S board on the PCI b

Function Library • 18 8. Turn on the computer. In some cases, when the computer boots up, the “Plug and Play” feature of Windows will detect the new

Function Library • 19 3.2 Driver Installation 3.2.1 WDM Driver Installation 1. Insert the Automation All-in-one CD to CD-ROM drive and click Driver In

Function Library • 20 4. Select Windows Driver for Windows 98/NT/2000/XP. 5. The driver will begin installing. 6. Click Next until the driver insta

Function Library • 21

Function Library • 22

Function Library • 23

©Copyright 2004 ADLINK Technology Inc All Rights Reserved. Manual Rev 1.00: March 26, 2004 Part No: 50-15029-100 The information in this document

Function Library • 24 7. Click Finish and restart the system. 8. Go to the System Control Panel and check to see that four “ADLINK Angelo Audio Devic

Function Library • 25 3.3 MPEG4 registration Each PCI-MP4S must be registered on the ADLINK website for legal authorization of the MPEG4 software com

Function Library • 26 b. Select the card index number and click the “Register” button. You will then the “Register” form with “Original Code” as bel

Function Library • 27 b. Enter your e-mail account and click “Submit” to proceed to “STEP 2”. If you are not yet registered, please go to “New Visitor

Function Library • 28 d. When finished, you will see the “Activation Code” as below. e. Go to “C:\Program Files\ADLINK\AngeloMpeg4\” path to exec

Function Library • 29 4 ViewCreator Utility Once hardware installation is complete, ensure that the system is correctly configured before running th

Function Library • 30 4.2 Component Description Tree Browser The Tree Browser window lists the PCI-MP4S cards and video ports available at the local

Function Library • 31 4.3 Operation theory ViewCreator provides many functions for the Angelo series card as described below. 4.3.1 MPEG4 Encoding Sin

Function Library • 32 Hue z Click and hold the left mouse button on the Hue slider of the Control Panel and drag the cursor to change its value. Valu

Function Library • 33 GPIO & LED z Click Tool in the menu bar and select GPIO & LED to bring up the GPIO dialog box. Select the port to access

Getting Service from ADLINK Customer Satisfaction is top priority for ADLINK TECHNOLOGY INC. If you need any help or service, please contact us. ADLI

Function Library • 34 5 Function Library This chapter describes the API for Mpeg4 encoding and decoding. Users can use these functions to develop app

Function Library • 35 AngeloMPEG4_Decode_Set_Image_Config(Decoder_Index, ConfigIndex , Value) AngeloMPEG4_Decode_Set_Motion_Detection(Decoder_Index, A

Function Library • 36 AngeloMPEG4_Encode_Create_Directory(Encoder_Index, Dir) – Create a new fold in encode site. AngeloMPEG4_Encode_Set_Motion_Det

Function Library • 37 AngeloMPEG4_Encode_Save_File_Stop: Use this function to stop saving the video file. In general, the video file will close autom

Function Library • 38 Indicates the channel index for the MPEG4 encoder. The range of channels is 0 – 15. Local_Address: Indicates the IP Address at t

Function Library • 39 2: CIF NTSC, with image size 320*240, 3: CIF PAL, with image size 320*240, 4: QCIF NTSC, with image size 160*120, 5: QCIF PAL

Function Library • 40 Result = AngeloMPEG4_Encode_Initial (Encoder_Index, Quality, Angelo_PortNo, Angelo_ChannelNo, Angelo_Color_Format, Angelo_Video_

Function Library • 41 AngeloMPEG4_Encode_Set_Callback(Encoder_Index:Longint; lpEncodeCallBackProc:EncodeCallBackProc):Longint; @ Argument Encoder_In

Function Library • 42 <Delphi > procedure Encode_Callback (Encoder_Index:Longint;int_status:Longint;var param_struct:param_str);stdcall var

Function Library • 43 AngeloMPEG4_Encode_Close (ByVal Encoder_Index As Long) As Long Delphi (Windows 98/NT/2000/XP) AngeloMPEG4_Encode_Start(Encoder_I

Table of Contents • i Table of Contents Chapter 1 Introduction ...1 1.1

Function Library • 44 Result := AngeloMPEG4_Encode_Stop(Encoder_Index); Result := AngeloMPEG4_Encode_Close(Encoder_Index); end; AngeloMPEG4_Encode_S

Function Library • 45 3: both Dir: The argument is the path and name of the directory that will be created. @ Return Code @ Example <VC/BCB >

Function Library • 46 format := 3; // save both format Result := AngeloMPEG4_Encode_Create_Directory(Encoder_Index, Dir); Result := AngeloMPEG4_Encode

Function Library • 47 This argument describes what actions the function will do. bit 0: Callback, X_Start, Y_Start, Width, Height: Sets the boundar

Function Library • 48 Result = AngeloMPEG4_Encode_Set_Motion_Detection(Encoder_Index, area, enable, Threshold, interval, action, X_Start, Y_Start, Wid

Function Library • 49 5.3 Decode Functions @ Name AngeloMPEG4_Decode_Set_Callback(Decoder_Index, CallBackProc) –Setup the callback function for deco

Function Library • 50 Use this function to establish a connection between decoder and encoder. Video data will then be transferred through this connec

Function Library • 51 If you save the video file into “.m4v” format and the file is closed, you can use this function to decode the video file and ret

Function Library • 52 Delphi (Windows 98/NT/2000/XP) AngeloMPEG4_Decode_Connect(Decoder_Index:Longint; Encoder_IP:String; Enocder_channel:Longint):Lon

Function Library • 53 var Decoder_Index: Longint; Encoder_IP: String; Encoder_Index: Longint; Result: Longint; begin Decoder_Index:= 0; Remote_IP := “

Table of Contents • ii Appendix B: Standard Compliance...75 Warranty Policy ...

Function Library • 54 void __stdcall Decode_Callback(int Decoder_Index, long int_status, long VideoBufferaddress) { if((int_status & 0x01) == 1

Function Library • 55 <Delphi > procedure DecoderCallbackProc(Decoder_Index:Longint; int_status:Longint; VideoBufferaddress:Longint); stdcall

Function Library • 56 2 for SATURATION (U) 3 for SATURATION (V) 4 for CONTRAST (LUMA) 5 for luma notch filter (for monochrome video, the notch filter

Function Library • 57 AngeloMPEG4_Decode_Set_Motion_Detection– @ Syntax C/C++ (Windows 98/NT/2000/XP) int AngeloMPEG4_Decode_Set_Motion_Detection(int

Function Library • 58 @ Example <VC/BCB > int Result; int Decoder_Index = 0; int enable = 1; int Threshold = 5; int interval = 3; int action =

Function Library • 59 enable, Threshold, interval, action: Longint, area:Longint, X_Star:Longint, Y_Start:Longint, Width: Longint, Height:Longint; beg

Function Library • 60 Indicates the width of the MPEG4 image size. iHeight: Indicates the height of the MPEG4 image size. Video_format: Full NTSC (640

Function Library • 61 <Visual Basic > Dim Result As Long, Decoder_Index As Long, iWidth As Long, iHeight As Long, video_format As Long, color_

Function Library • 62 1 for playback. speed: play speed. -2 for 2x slow -4 for 4x slow 0 for normal speed 1 for 1x fast 2 for 2x fast 4 for 4x fast @

Function Library • 63 end; AngeloMPEG4_Decode_Start– AngeloMPEG4_Decode_Sop– @ Syntax C/C++ (Windows 98/NT/2000/XP) int AngeloMPEG4_Decode_Start(in

Introduction • 1 1 Introduction The PCI-MP4S is a MPEG4 software video compression development kit that combines excellent real-time image acquisition

Function Library • 64 Result := AngeloMPEG4_Decode_Stop(Decoder_Index); end; AngeloMPEG4_Decode_Expansion– @ Syntax C/C++ (Windows 98/NT/2000/XP) i

Function Library • 65 Scale := 2; Result := AngeloMPEG4_Decode_Expansion(Decoder_Index, Scale); end; AngeloMPEG4_Decode_Get_FlowRate– @ Syntax C/C+

Function Library • 66 var Decoder_Index: Longint; Byte_Second: Longint; Result: Longint; begin Decoder_Index:= 0; Result := AngeloMPEG4_Decode_Get_Flo

Function Library • 67 High 1 Bitrate = 512000*4frame_rate = 30 Bitrate = 512000 frame_rate = 30 Bitrate = 512000/4 frame_rate = 30 Highest 2 Bitrate =

Function Library • 68 Result = AngeloMPEG4_Decode_ReInitia(Decoder_Index, Quality, Angelo_Video_Format) Result = AngeloMPEG4_Decode_ReInitiaEx(Decoder

Function Library • 69 interval_second: This argument is the number of seconds of encoded video to be saved. format: 1: m4v, 2: avi. 3: both. @ Return

Function Library • 70 format := 3; // Save both format Result := AngeloMPEG4_Decode_Save_File_Start(Decoder_Index, n_file_name, interval_second, forma

Function Library • 71 int Result; long Mp4Version[4] = {0}, DLLVersion[4] = {0}, VersionReserved[4] = {0}; CString str1, str2; Result = AngeloMPEG4_Ge

Appendix • 73 Appendix Appendix A: Glossary Brightness: Attribute of a visual sensation according to which an area appears to exhibit more or less li

Introduction • 2 1.1 Features 1.1.1 Image Acquisition Acquisition speed NTSC 1 Camera 2 Cameras 3 Cameras 4 Cameras 8 Cameras Fields 60 120 180

Appendix • 74 Attribution of visual sensation according to which area appears to be similar to one, or proportions of two, of the perceived colors red

Appendix • 75 Appendix B: Standard Compliance Notice for USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15 T

Warranty Policy • 77 Warranty Policy Thank you for choosing ADLINK. To understand your rights and enjoy all the after-sales services we offer, please

Introduction • 3 Highest 2 Bitrate = 1024000*4 frame_rate = 30 Bitrate = 1024000frame_rate = 30 Bitrate = 1024000/4 frame_rate = 30 Supports setting o